Details: Abloy Sentry LE181 Mortise Lock Case, Finish-Zinc Plated And Lacquered Steel

The door is opened from outside with a lever handle. The lock case fulfils the requirements of the European standard for exit products SFS-EN179 and SFS-EN1125 and the requirements of the lock case standard SFS-EN12209. The lock is always opened from the inside by a lever handle or panic bar. The latchbolt protrudes 14 mm. Deadlocking is controlled by a snib in the front plate. Using of the snib is normally blocked. The snib is released by turning the key. When the snib is in its up position, the lock will deadlock when the door closes and can only be opened by a key from the outside or by a lever handle, push pad, or panic bar from the inside. When the snib is in its down position, the lock can be also be opened by the exterior handle.

Passive lock case: EXH911, EXB911, and EXH915.

Fire resistance: solid doors EI1 15 - EI1 30 and EI2 15 ? EI2 30, Metal doors EI1 15 - EI1 120 and EI2 15 ? EI2 120

Mortice standard: OneFit